Perfect pass for my Ski Nautique 2001

(trickyboarder08)

Found This on Ebay

http://cgi.ebay.com/ebaymotors/Perfect-pass-wakeboard-cruise_W0QQcmdZViewItemQQcategoryZ50437QQihZ015QQi temZ250225119114QQrdZ1QQsspagenameZWDVW

Would this fit on my boat. I have a 1982 Ski Nautique. Is this just the cruise version? If so can it be upgraded and what parts would I have to buy to do that?

(rodltg2) · (rodltg2) **Join Date: Oct 2005** 03-13-2008, 10:24 AM

save your money and buy wakeboard pro. no servo and no paddle wheel...

(jonblarc7) · (jonblarc7) **Join Date: Jul 2006** 03-13-2008, 12:08 PM

Will that even work on a Nautique when it says its MasterCraft

(astonestreet) · (astonestreet) **Join Date: Oct 2007** 03-13-2008, 12:51 PM

You can reply to the post but not my email..... I see how it is Jonblar

(jonblarc7) · (jonblarc7) **Join Date: Jul 2006** 03-13-2008, 1:32 PM

Just trying to get the right answer before I told you it would work for me.

(astonestreet) · (astonestreet) **Join Date: Oct 2007** 03-14-2008, 11:31 AM

EXCUSES

(icedog10) · (icedog10) **Join Date: Sep 2007** 03-15-2008, 6:41 AM

If you have Perfect Pass Cruise, can you just get a servo and paddle wheel and add it on? If so about how much would it cost?

(kko13) · (kko13) **Join Date: Jul 2006** 03-15-2008, 7:02 AM

its not worth 250 impo by the time you buy the missing parts buy it new and get a warranty for same or a little more. the fact that is says mastercraft on it will have no bearing on it working in your naut. but $150 would be tops. servo is gona run you $150 bucks and i think the paddle wheel is close to a $100

(loudsubz) · (loudsubz) **Join Date: Aug 2001** 03-15-2008, 7:28 AM

how much do perfect pass kits go for normally? complete...

(sidekicknicholas)

like 1600 w/ dealer install (i think)

K.B.C. 03-15-2008, 11:26 AM

1200 if you install it yourself, I got mine through a dealer discount on the planetnautique site for just under a grand a few years back

(wakereviews) · (wakereviews) **Join Date: Sep 2006** 03-15-2008, 11:43 AM

We can get PP for a pretty good price. Or check perfectpass.com for the price list. most people who order through us do the install themselves. 3 - 4 hours to install for a mechanically inclined first timer.

(froese) · (froese) **Join Date: Jun 2005** 03-19-2008, 6:06 AM

That is just 'Wakeboard Cruise'. You can not set it to hold at a specific speed - you get the boat to speed and then push the 'cruise' button.

Notice the control module says 'for upgrade info call...'

You can upgrade the module to the pro version, but you would need to buy a paddle wheel, a new display unit and servo. Might as well get it new for $1100 and install it right.

I have a SN2001 and it works like a charm... get the ACME 542 prop - that makes a world of difference.

(malibuboarder75)

Also, remember that if your boat is in good condition, perfect pass will add a lot to the final value. Also, get the acme 542 if you haven't already. It is more important than perfect pass.

(dhcomp) · (dhcomp) **Join Date: Jun 2003** 03-19-2008, 8:20 AM

Order a new wakeboard pro.

It will come with everything you need.

THat cruise setup looks to work wiht a Drive by wire setup, with no servo.

Not worth trying to piece it together.