|
working on a stereo upgrade and installed a pair of pro80's with the trick connect 2 clamps. the round stainless clamps.
so i installed the flat bar with the round toothed knob on top of each pro 80, then i mounted the clamps and took off the little bracket, slid the speaker up on there and tightened down the bracket. they seemed pretty snug and the directions said do not overtighten.
we called it a day and headed home. when we got the boat in the garage, i noticed both of the speakers were wobling, so i took a quick peak and the each of the two alen head screws on the little brackets were lose. am i missing something? i did have two washers and two nuts, but i don't think the screws polk through far enough to put those on. am i missing something?
the directions in the box were for the older square clamps, the original quick connect i believe. i kind of assumed the extra nut and washer were for those style clamps.
anybody know?
(Message edited by brucemac on February 21, 2009)
|
Hybrid Mode
