Adding fat sacs to nautique SV 211

Has anyone had any experience adding fat sacs to the existing ballast system in a Nautique SV 211??

got this from tyler and mikeski...

-400 lbs of lead (pop products)3 each locker and 2-3 in the front and 1 to move around)..
-rear ballast full
-belly 1/2 to 2/3 full

I heard that the set-up that Tyler, Mikeski & Clubmyke use works well.

I have found that the sickest set-up with a fatsack is:

-All stock ballast full
-750 lbs. fat sack running lengthwise in the back (the fat sack should be touching the back cushion and stop right before the driver seat)
-3 people behind windshield (driver & 2 Paxs)
-3 people midship (one on each side of the fat sack and one sitting on it)

No added weight in the bow! This boat likes to be stern heavy. This set-up provides a super rampy wake with a little lip at the top. It is really thick and will for sure pop you like mad.

I know a lot of people say you don't need that much extra weight to get a good wake on the 211. This is true, but if you want it to get really hard, then there is no substitute for weight (it's physics).

Have fun!