MC prostar 205 owners

(shawnmdarnell) · (shawnmdarnell) **Join Date: Feb 2003** 02-05-2007, 7:40 PM

I have a buddy looking into buying a used 205 and is worried he won't be able to get it to fit in his standard 2 car garage. The trailers tongue does not break away, so he is going to have to go in at an angle. The question is, will it fit at an angle with out a detachable tongue?

(skibum69) · (skibum69) **Join Date: Aug 2004** 02-06-2007, 5:49 AM

Yes it will fit at an angle, if he has lots of stuff on the sides of the stalls, he might have to take the swim deck off.

(bstroop)

Yes x2

(etakk7) · (etakk7) **Join Date: Apr 2006** 02-06-2007, 7:08 AM

i can fit my 205V into one side of the garage. The tongue does swing but that only is about 18 inches less. Platform off.

(etakk7) · (etakk7) **Join Date: Apr 2006** 02-06-2007, 7:09 AM

plus I have heard you can have your trailer turned into a swing tongue for a couple hundred bucks - check on tmcowners.com - I think that is where I read that

(point1234) · (point1234) **Join Date: Apr 2006** 02-06-2007, 7:24 AM

here is one place extremetrailers.com

you have to dig for it and it goes to another web site called Pivithitch or something like that. It has been done before something iam going to look into also someday.

(Message edited by point1234 on February 06, 2007)

(curtisco24) · (curtisco24) **Join Date: Dec 2005** 02-06-2007, 7:36 AM

You can have you trailer converted for 200 to 250. It is well worth it.

(shawnmdarnell) · (shawnmdarnell) **Join Date: Feb 2003** 02-10-2007, 9:53 AM

Does anyone have any recommendations for a trailer shop that would be willing to convert to a swing away in nor-cal?

(iws200) · (iws200) **Join Date: Feb 2007** 02-15-2007, 10:15 AM

does anyone have any info on a mastercraft powerstar?ive been looking for one for a while now

(rich_g) · (rich_g) **Join Date: May 2003** 02-15-2007, 3:59 PM

Mine fits in my 23'4" garage with a few inches to spare with the platform removed.

It was a lot easier to get it in the garage by taking the guide poles off the trailer. There is a bolt underneath, and they slide out. Other trailers I've owned had welded poles.