2001 SAN Ballast, Perfect Pass, and misc. Spring projects

Began work on some additions for this year,

Here is last years build : http://www.wakeworld.com/MB/Discus/messages/65921/672900.html?1240599090

This is the list for this year:

- Upgrade Ballast System
- Install Perfect Pass
- Add Bow Cleat
- Relocate secondary battery and SurePower isolator
- Replace Bilge Pump
- Replace Depth Finder
- Run larger gauge power line from batteries to fuse panel under dash
- Media blast and powder coat vents and pylon bezel


Ballast
================
Last season we had a set of V-drive sacs, a cheap ski locker sac, and a bow sac. The ski and bow were filled manually, while the v-drive sacs were filled but the stock pump system, one 800 Tsunami to fill both and one to empty both...boo

So its time for a well needed upgrade. Went through a bunch of designs and decided on sticking with aerator pumps. The bang for the buck is just too hard to pass up. I know everyone swears by jabscos but i still havent been sold on the cost and cost to replace.

So here is the plan

(2) 750's in the rear compartments


(1) V-drive sac in the ski locker


(1) Bow sac



Here is the layout


and the connection diagram