Articles
   
       
Pics/Video
       
Wake 101
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Share 
Reply
 
Thread Tools Display Modes
Old     (illini88)      Join Date: Oct 2007       06-20-2013, 4:07 PM Reply   
I have an 01 centurion elite v w a black scorpion motor. The impeller housing was cracked and fell apart. The new one came in the mail, but I want to be surei get it installed right. Any idea on whether this boat has left hand prop rotation or right hand?
Old     (rasorjb)      Join Date: Nov 2011       06-20-2013, 5:09 PM Reply   
The prop rotation shouldn't matter for the impeller direction, it is belt driven. Once you start the boat up the impeller will flop to the correct direction. Just make sure when you put the impeller in you use a water based lube on it for its initial start.
Old     (baitkiller)      Join Date: Jan 2010       06-20-2013, 5:22 PM Reply   
If you are concerned with hose placement, its a LH engine.
Old     (Dmac420sj)      Join Date: Mar 2012       06-20-2013, 6:11 PM Reply   
Don't over tighten that housing or you will be waiting for another housing. Lol be easy my friend be easy.
Old     (illini88)      Join Date: Oct 2007       06-20-2013, 8:11 PM Reply   
That's exactly what I was looking for. I thought it was left but wanted to confirm. Thanks
Old     (rasorjb)      Join Date: Nov 2011       06-20-2013, 9:39 PM Reply   
Are the hoses not different sizes? I'm almost positive my 350 MPI Tow is two different sizes...
Old     (illini88)      Join Date: Oct 2007       06-21-2013, 4:34 AM Reply   
The hoses are the same size, the part is marked "LH out" and RH out'. My assumption is it won't suck water if upside down. I know that one of the above post said not to over tighten. Is this because I'd crack it as I tighten or because it will cause extra fatigue over time?
Old     (Dmac420sj)      Join Date: Mar 2012       06-21-2013, 5:08 AM Reply   
It will crack right when you put it on
Old     (illini88)      Join Date: Oct 2007       06-21-2013, 6:20 AM Reply   
As is when I put the housing on the pulley or when I crank the motor over. Sorry, I probably sound like a moron.
Old     (Dmac420sj)      Join Date: Mar 2012       06-21-2013, 6:53 AM Reply   
As in if you over tighten the bolts "crack" $ down the drain. Just make them snug
Old     (illini88)      Join Date: Oct 2007       06-21-2013, 8:40 AM Reply   
Gotcha. I reassembled. Didn't use too much elbow grease

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 2:41 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2019 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us