06 supra roswell tower mounting problems

troystubb 11-12-2006, 4:14 PM

I have a 06 supra with a roswell tower. the back mounts for the tower seem to not be sitting flat against the hull is this normal?

(truebeachbum) · (truebeachbum) **Join Date: Oct 2006** 11-12-2006, 5:42 PM

mine fits fine

(supra24ssv) · (supra24ssv) **Join Date: Mar 2006** 11-12-2006, 5:54 PM

show us some pics, then we can help

troystubb 11-12-2006, 7:24 PM

hey here are some pics ( sorry they are really bad , the key its right under the back mount of the tower

troystubb 11-12-2006, 7:33 PM

(supra24ssv) · (supra24ssv) **Join Date: Mar 2006** 11-12-2006, 7:38 PM

is the rubber spacer still under it

(supra24ssv) · (supra24ssv) **Join Date: Mar 2006** 11-12-2006, 7:39 PM

my rubber spacer shifted slightly but did not come out, if this is the case w/ yours, you should be fine

troystubb 11-12-2006, 7:44 PM

no the rubber boot is still on it , but there is a 8th inch space under the boot

troystubb 11-12-2006, 7:45 PM

i can see the screw threads

(dan_lee) · (dan_lee) **Join Date: Jan 2003** 11-13-2006, 1:29 PM

FYI the tower is made by Xtreme Tower Products. Roswell is OEM for the accesories. If this seems to be an issue you can loosen up the nuts on these, set it straight and tighten them down. You may have to remove a speaker in the rear depending on which model of boat this is on but it appears to be on a 24?
There is a nut underneath, probably a 2 person job.

Dan

(supra24ssv) · (supra24ssv) **Join Date: Mar 2006** 11-13-2006, 3:03 PM

it will be fine unless it comes out, if i was worried this winter i would have the dealer replace the rubber stops for you it should be under warranty

(ryan27r) · (ryan27r) **Join Date: Oct 2006** 11-13-2006, 4:19 PM

Bring it to the dealer and tell them whats up and you want if fixxed problem solved