|
it has been a a handful of days of install work and finally today I got the wetsounds 3-some and SYN 6 amp all hooked up and playing music, I also installed a WS-420 EQ. My question is what are good baseline settings for the gains and frequency adjustments on the amp and EQ? I know i should be talking to wetsounds tech support but its saturday night and id like to use the boat tomorrow with greater success... basically i have heard wetsounds speakers before and was blown away by how loud they were but on my boat they just dont seem as loud and clear, but I am also new to the audiophile world and have no idea where to start. I am running the SYN 6 amp bridged to only run the 3 some so channels 1-4 going to the pro 80s and 5/6 to the pro 485. The instructions just dont really say where to start from and i'm clueless about adjusting it, i know what sounds good and know what i want, but there are so many adjustments that could be made between the EQ and the amp that im overwhelmed, I know all systems differ but i need a place to start! Thanks all!
Jeff
|
Threaded Mode