Top Sheet Gone ...

(vince_trac) · (vince_trac) **Join Date: Aug 2007** 10-26-2008, 6:28 AM

Hello...i've a problem..i bought my premier 136 on internet last year. When i received i noticed many bubbles in the top sheet but i wanted to ride so i went whith it. Last week, the top sheet started to go away on the tail. It's gone on about 3 inches. How can I "glue" it again ??thanxs a looot ...

(fredlap) · (fredlap) **Join Date: Jul 2008** 10-26-2008, 8:33 AM

It happened with my recoil and slingshot changed it. Great company!

(eternalshadow) · (eternalshadow) **Join Date: Nov 2001** 10-26-2008, 8:43 AM

If you're looking at glueing it instead of trying to warranty it (you always here stories about wakeworlders calling/writing up hyperlite to see if they can get warranty on it and many seem successful) you probably want to consider something like an epoxy.

(mjfan23) · (mjfan23) **Join Date: Nov 2003** 10-26-2008, 9:09 AM

call em up, see if they will replace it before trying to fix it yourself.

(hawkeye7708) · (hawkeye7708) **Join Date: Feb 2007** 10-26-2008, 9:23 AM

Warranty that shizz!!!!!

(seven20) · (seven20) **Join Date: Feb 2003** 10-26-2008, 5:26 PM

you mean the topsheet, or just the graphics are peeling?

(westsidarider) · (westsidarider) **Join Date: Feb 2003** 10-26-2008, 5:32 PM

hyperlite will warranty it no problem... not sure if you will have to send it to them and wait till a new one comes back but it will be replaced with a 09. you have to pay shipping to get it there which is about 20-30 bucks depending on where you live. if you have a local shop i would go to them and see if they can help you out by getting a board quicker

(coreym) · (coreym) **Join Date: Sep 2008** 11-01-2008, 11:49 AM

Take it back to the place that you bought it at and have them call Corey and get a RA #. I will help them out with all of it and make sure it happens without a problem. Let me know if you have any problems and I will take care of it. Thanks

Corey M @ Hyperlite