With a friend to help out, you should be able to install either tower in an afternoon. In generalized terms, here is the installation process:
1. Mask the deck of the boat in the area where the tower feet will be installed to prevent damage.
2. Assemble tower hardware and lift on to boat for a test fit.
3. Mark location for each tower foot and remove tower.
4. Drill gelcoat with bit running in reverse, then drill through fiberglass and
chamfer each hole to prevent spider cracks.
5. Lift tower on to boat again and install hardware.
If you decide to go with a Titan tower, we will be happy to walk you through the install process and answer any questions we can.
Jason
www.titanwake.com