Wake 101
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through June 08, 2008

Thread Tools Display Modes
Old    mcbean7            04-29-2008, 8:10 AM Reply   
I'm located in Chandler. Where is a good place to get marine parts close to here?
Old     (azpowerhouse)      Join Date: Jul 2007       04-29-2008, 8:15 AM Reply   
Probably your local dealer. I sometimes use skidim as well.
Old    mcbean7            04-29-2008, 8:20 AM Reply   
I bought the boat used from a private seller. New to boating. I don't know any shops around here.
Old     (martinique)      Join Date: Sep 2006       04-29-2008, 8:53 AM Reply   
Century Marine is in Mesa and is a centurion dealer which is the boat listed in your profile
Old    mcbean7            04-29-2008, 10:01 AM Reply   
thanks AG. I'll give them a call.
Old     (watsoc)      Join Date: Apr 2005       04-29-2008, 11:48 AM Reply   
Century Marine is a great dealer and they will take good care of you.
Old    mcbean7            04-29-2008, 12:39 PM Reply   
AG and Chris-thanks for the referral. I just got off the phone with Century Marine. I'll be heading over there to pick up some plugs and stuff. Thanks.
Old     (266crownlinebr)      Join Date: Apr 2007       04-29-2008, 5:36 PM Reply   
I like bass pro. You would be surprised how much stuff they have. Also, I think Century is good if you have a volvo, but Marine Max is the place to go if you have a Mercruiser. I will tell you where not to go...Darner Marine. Horrible service.
Old     (tigerules)      Join Date: Mar 2008       04-29-2008, 6:12 PM Reply   
Century Marine rules! The people there are second to none and always take great care of me and my buddies. I won't buy another boat, ever, from anyone other than Century Marine (unless it's a houseboat). I don't care if you have a Volvo, PCM, Indmar, Mercruiser, or any other inboard Scott can fix it and anything that is built around it.
Old     (bsebllhglyknit)      Join Date: Jul 2007       04-29-2008, 8:48 PM Reply   
I would recommend Surfside Marine. There new place is huge and the service guys are awesome. Talk to Chad for service, or Wade for parts. imo Surfside takes better care of there customers. Everything down to a complimentary wash, inside and out. We didnt get that when we took our boat to century. There located on dobson between broadway and main
Old     (266crownlinebr)      Join Date: Apr 2007       04-29-2008, 9:37 PM Reply   
NO, NO, NO, not surfside...your boat will never be the same. I have a Crownline. I know what I am talking about.
Old     (bsebllhglyknit)      Join Date: Jul 2007       04-30-2008, 6:31 AM Reply   
Why not surfside? Everything we have ever done there the service has been awesome. The boat runs better then it ever has
Old     (w00taz)      Join Date: Jun 2007       04-30-2008, 8:47 AM Reply   
I bought my boat @ surfside and they were great. I had one issue which got worked out. I also had them do my first maint there. I live on the north end of town and buy parts and do my own maint. They didn't seem to do anything wrong @ surfside I don't see why anyone would not recommend them but then again how bad do you have to be to f**k up an oil change..
Old     (azwakekid)      Join Date: Apr 2005       04-30-2008, 5:35 PM Reply   
cole what bad experince did you have at darner? i used to work there. there only one of the few stand up shops in town.

(Message edited by azwakekid on April 30, 2008)
Old     (w00taz)      Join Date: Jun 2007       04-30-2008, 11:02 PM Reply   
Paradise treats my buddy w/ a bu like a champ too. They're next to surfside. Another place I hear you can get the oil filters and stuff is napa auto? I don't know the details maybe search the forum a bit for more info.
Old     (bsebllhglyknit)      Join Date: Jul 2007       05-02-2008, 7:01 PM Reply   
Surfside moved to 150 S. Dobson Rd.
Dobson between broadway and main. There new place is sick
Old     (jeff359)      Join Date: Jun 2005       05-03-2008, 11:15 AM Reply   
can someone clearify why owning a crownline validates what a person is talking about??
Old     (bsebllhglyknit)      Join Date: Jul 2007       05-03-2008, 8:05 PM Reply   
cause if you own a crownline surfside screws you over. Only century really takes care of you if you own a crownline.
Old     (266crownlinebr)      Join Date: Apr 2007       05-06-2008, 3:27 AM Reply   
Thanks Ryan.

Rodney, Darner had my boat last year for over 4 months. Went in to have them do preventative maintenance on my bravo 3. Nothing wrong with it before I took it in, just wanted to get an inspection. They said it would be a couple of weeks at most. I would call him almost every week and ask if it were done (needed to have some interior work done - they took so long I couldn't get it done before summer). He would tell me that the boat would be done the next day...I would call the next morning telling him I was on my way to get it and he would say he didn't get to it and it would be done the next week. That happend more than 4 times. How do you go from it being done the next day (multiple times) to taking 4 more weeks. I get it back and the first time out my impeller smoked - had to be towed back to the dock. My guess is they ran it without a hose hooked up. They replaced my gimble bearing, cv boot and u-joints, tilt sensors and aligned my engine. Should have lasted a few years without problems. Just got it back from Marine Max because my gimble bearing got chewed up. When they got into my drive, they found the original u-joints still in there and I know this because they were completely rusted (couldn't happen in 10 months of fresh water). Since it had been 10 months, and I didn't trust them, I figured I wasn't going to get anything from them but excuses.

Surfside, I should have said I have not had work done there and here is why. Every time I go in there to get parts from them, about 7 times, they have given me attitude and are no help. I did not buy my boat from them, so I shouldn't say that is bad either. I am the type of person that if one part of the business is not up to par, the whole business is not up to par. I have tried to give them second chance after second chance to get it together. I needed a quote for some new emblems, 2 months later after going up there and calling every two weeks, I gave up on them. That was one of my first experinces with them. The last one was just last month in their new location. I got spark plugs, oil filter, fuel/water seperator, distributor cap and rotor. I gave them the actual part numbers for the oil filter, spark plugs and fuel/water seperator. I gave them the serial numbers for my engine with the size and displacement so they could look up the cap and rotor part numbers. I start to work on the boat the next week and the fuel/water seperator and the oil filter were off by one number - hindsight, yes I should have checked before I left their counter. Start to pull off the cap and rotor, they are completely different than what I needed - hindsight, yes I should have looked at my cap and rotor before going down there but thought since they are a crownline dealer and I gave them the correct information to look up what I needed, that I would be ok. I have a couple more that I could post, but I think you get the idea. I like crownlines, I am friendly when I go in there, but I would not have them do anything more than get me parts because of my personal experince going there. Good luck, sounds like they are hit and miss.
Old     (bsebllhglyknit)      Join Date: Jul 2007       05-06-2008, 5:12 PM Reply   
From what I have heard, Surfside let go there service manager and have a new guy. Everything is running alot smoother and service has improved. I sucks about your experiance but they said right now there dealing with alot of pissed off people from the last service guy and trying to make things right. I think that is who you might of dealt with. You should come back in and talk to Jeff. Im pretty sure things are better.
Old     (ridealready)      Join Date: Feb 2006       05-06-2008, 10:13 PM Reply   
I have done business for several years with them and seen 3 or so different service managers come and go. Good people are hard to find and keep in that business. I can honestly say their new guys are on point and the new shop can only make them more efficient and able to provide better service.
Old     (bill_airjunky)      Join Date: Apr 2002       05-06-2008, 10:30 PM Reply   
Most engine parts for inboards & I/Os are available at any auto parts shop for a lot less than a boat dealer sells them. Spark plugs, plug wires, distributor caps, oil filters, fuel filters, etc. Their all the same as any car or truck engine.
The exception to that is things like the starter & alternator that are special marine versions for use in an enclosed engine compartment. And even those can be bought or rebuilt locally.
Old     (266crownlinebr)      Join Date: Apr 2007       05-07-2008, 2:55 AM Reply   
I probably won't try them again, but maybe they are trying to get better. Bill, your right, and that is what I usually do. Just decided I needed help with the distributor cap and rotor. Didn't want to take them off. Much easier one plug wire at a time. With gas prices as high as they are, it was also cheaper driving one place instead of two.
Old     (tigerules)      Join Date: Mar 2008       05-07-2008, 8:17 AM Reply   
Just take it to Century Marine. They recently moved into a huge shop with a huge yard (the old BMW Dealership on Main). Scott and Tammy will do a great job no matter what.
Old     (azwakekid)      Join Date: Apr 2005       05-07-2008, 7:16 PM Reply   
im sorry to hear that cole. i guess i was not there when you had your boat serviced at darners. you boat in your picture looks pretty new. how come the re rubber on the back end? usually if you have to have it done its cause of neglect or the boat is over 10 years old. and i know that there service is not fast. but i know that there work is top notch. also how did you get marine max to service yur boat? from what i know is that they dont service any other boats then sea rays. and in the busy months april threw october they wont touch anything older then 2 years old.
Old     (266crownlinebr)      Join Date: Apr 2007       05-10-2008, 3:07 PM Reply   
Re Rubber on the backend? I can't remember how to get to the pictures on this site. If you are talking about the white rubber on the swim platform, it is because I just had that added last year. I keep forgetting to go up to and get the black. My boat has been taken care of. It is 12 years old though. Marine Max will service Mercruiser equipment as they are a certified dealer. They were really fast at Marine Max. I had it back in a week.


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

All times are GMT -7. The time now is 8:46 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home


© 2019 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us