ideas for garage wall board rack

mplv 05-11-2006, 11:04 AM

has anyone built anything, ive got to do something today.

Upload

(bbeach) · (bbeach) **Join Date: Jul 2002** 05-11-2006, 11:25 AM

I use those rubber coated hooks you can buy at Lowe's or Home Depot... They are cheap and work well... Another option for more support, although a bit more costly are the ladder hangers you can also buy... They are covered with a pipe insulation material...

(tings00) · (tings00) **Join Date: Aug 2005** 05-11-2006, 11:26 AM

what bindings are you gonna use on the roam

(breadbutta) · (breadbutta) **Join Date: Dec 2003** 05-11-2006, 11:27 AM

Advice? Yes, send me the Roam and the Wake surfboard! OK, the Parks, too.

(ghostrider_2) · (ghostrider_2) **Join Date: Aug 2004** 05-11-2006, 11:28 AM

Home Depot, 4.99 each, each one is set in the wall with 3 screws and each one hold one board.

I've seen the same ones from homedepot sell on the net for close to 50 bucks each, dont be a sucker.

(innov8) · (innov8) **Join Date: May 2005** 05-11-2006, 11:30 AM

Check out
www.rockyracks.com they got some sweet racks

mplv 05-11-2006, 11:46 AM

kenny, can you find a pic of what your talking about.

i rode the roam with my transits and didnt like it ,that krown board on the far left is far more fun without fins that the roam is imo. im probably going to sell the roam

(toby_yeo) · (toby_yeo) **Join Date: Feb 2006** 05-11-2006, 11:50 AM

someone has plenty of money to spare...

(ghostrider_2) · (ghostrider_2) **Join Date: Aug 2004** 05-11-2006, 11:53 AM

when I get home tonight I will take a pic of my garage wall with the boards for you. its not on the home depot web site.

(breadbutta) · (breadbutta) **Join Date: Dec 2003** 05-11-2006, 11:55 AM

** Hijack **

MPLV, Why didn't you like the Roam? How do you like the Parks?

** End Hijack **

(ghostrider_2) · (ghostrider_2) **Join Date: Aug 2004** 05-11-2006, 11:55 AM

rocky racks is a rip off they are just like the ones from home depot, they have both connected and none connected racks, I would avoid rocky racks at all cost!!

mplv 05-11-2006, 11:55 AM

well the 2 on the left belong to friends, but since i own the boat they leave em here, the motive is the boats board, watson is mine, diva was the gf's xmas present. i told her it was an ironing board, had to beg her to open it. everyone loves to surf and the roam i bought one day because i was bored but im prolly selling it

mplv 05-11-2006, 11:58 AM

the roam: with size 14 feet and magnum bindings the board just feels strange, when i edge my toes are in the water and it just seems like a yardsale waiting to happen.

i dont have a parks, except for my middle name. the black board i think your talking about is an 06 142 watson

(tings00) · (tings00) **Join Date: Aug 2005** 05-11-2006, 12:40 PM

how much is the roam for sale

(will5150) · (will5150) **Join Date: Oct 2002** 05-11-2006, 12:44 PM

B Tingey- are you related to McKay Tingey in Sammamish?

(ldr) · (ldr) **Join Date: Nov 2002** 05-11-2006, 1:35 PM

Here is the rack that my Dad made. It's similar to ones in a shop with just wooden dowls to seperate the boards. Plus this link might help
http://www.wakeworld.com/MB/Discus/messages/65921/203414.html

Upload

(Message edited by ldr on May 11, 2006)

(Message edited by ldr on May 11, 2006)

(tings00) · (tings00) **Join Date: Aug 2005** 05-11-2006, 1:44 PM

will5150 - not that i know of, where is Sammamish

(ldr) · (ldr) **Join Date: Nov 2002** 05-11-2006, 1:49 PM

In Washington state i beleive.

(will5150) · (will5150) **Join Date: Oct 2002** 05-11-2006, 1:59 PM

Sammamish is a suburb of Seattle

(nautique_04_226)

This rack is 15 years old it was made for knee boards that is why the spacing is off for wakeboards. Upload

(tparider) · (tparider) **Join Date: Aug 2003** 05-11-2006, 4:16 PM

here's a thread with a ton of examples.

http://www.wakeworld.com/MB/Discus/messages/65919/98630.html

mplv 05-11-2006, 4:28 PM

i actually just got back from lowes and bought some of those bike racks from the end of that thread

(buzz_grande) · (buzz_grande) **Join Date: Mar 2004** 05-11-2006, 4:29 PM

I don't have a pic with me at work, but mine are like Freds, except mine go from floor to ceiling, and I have 2 sets. I have way too many boards. Total cost probably under $20.

(sjmedic) · (sjmedic) **Join Date: May 2004** 05-11-2006, 6:43 PM

Just let me know how many you need, they hold 4 or 8 boards each, depending on whether you want them back to back or only in a row. $50 each. Upload

(denjoe) · (denjoe) **Join Date: Jan 2006** 05-12-2006, 3:40 PM

I used standard hangers from Home Depot. They are used to hang bikes and tools, they work great. They have padding on the hangers to protect the boards.

swass 05-12-2006, 3:44 PM

$50 for two nylon straps?????

(ghostrider_2) · (ghostrider_2) **Join Date: Aug 2004** 05-12-2006, 3:56 PM

Sorry about the delay but here is a pic.
remember 4.99 at home depot.
Upload

(denjoe) · (denjoe) **Join Date: Jan 2006** 05-12-2006, 3:57 PM

I used the same ones as Kenny. They work great!

(ladythump) · (ladythump) **Join Date: Jul 2004** 05-12-2006, 9:50 PM

I can't hang anything on the walls in my garage (rental unit) .... any pics of free-standing board racks???