You can get it in with minimal(subjective) hassle. We had the same problem. What we do is keep a ratchet on the boat to remove the two screws that attach the board rack support to the top portion of the tower. We then fold the tower forward. Then we undo the two hand knobs on either side to remove the whole side support/boardrack and set then on the floor of the boat. The hardest part is lifting the side supports around. Other than that everything lines up easily. when putting the tower back up just reverse the process. It sounds like a big deal but it's really not. Two people can do it in a couple of minutes. My dad can now do it by himself if he needs to, it just takes some practice. It's easier than modifying your garage, trailer or both.
|