New Dimension Tower on 1990 Supra Sunsport

(mattgettel) · (mattgettel) **Join Date: Jan 2009** 04-29-2009, 6:28 PM

My new dimension tower is supposed to be delivered in a couple days. I got to looking at it tonight to see how difficult it was going to be to access the backing plate area on the under side of the boat. I am struggling to figure out how to get to that section of the boat. Any ideas?

(mhunter) · (mhunter) **Join Date: Mar 2008** 04-29-2009, 7:12 PM

Matt
I installed a ND tower on my 89 Sunsport 2 years ago. Email me and I will send you full instructions and pictures.
remaxhunter@hotmail.com

(maxx_wake) · (maxx_wake) **Join Date: Sep 2003** 04-29-2009, 8:03 PM

When I installed my tower on my 90 SunSport a few years ago I had to cut a couple of access holes behind the trim panels in order to get everything installed.

(mattgettel) · (mattgettel) **Join Date: Jan 2009** 04-30-2009, 5:06 AM

thanks for the help guys. i was thinking that i would have to cut a couple of holes.

(elbastardo) · (elbastardo) **Join Date: Mar 2008** 04-30-2009, 7:49 AM

On my 92 the rear mounts were the easy part--I removed the side panels and there was a big hole in the wall. It looked like it may have been for additional speakers. The front mounts are the difficult part. You have to go in through the vents which are pretty small. I bought a nice set of hinged ratcheting wrenches which helped a lot.

(mattgettel) · (mattgettel) **Join Date: Jan 2009** 04-30-2009, 9:07 AM

thanks Greg. The driver side is pretty well exposed on the front, but i am not sure about the back.