Wake 101
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through May 04, 2005

Thread Tools Display Modes
Old     (skibum69)      Join Date: Aug 2004       03-31-2005, 7:02 AM Reply   
Has anybody polished their aluminum cans? I was working with mine lastnight and the saw blade got gummed up with aluminum and even though I had them wrapped in bubble wrap, the pounding of them up and down scratched the bottom. So I need to buff them and wondering if anybody has done this and what they used. Thanks
Old     (biz)      Join Date: Mar 2004       03-31-2005, 9:29 AM Reply   
Home Depot sells a kit.. you need a polishing wheel and some polishing rouge. It is easier to do when it is warm outside as heat plays a big part in the polishing of the part. Be forewarned, it does take time. Also make sure you don't have a clear coat on it, it may not match the other can(s) if you take the clear coat off of only only one of the cans.
Old     (bummerkit)      Join Date: Apr 2003       03-31-2005, 9:42 AM Reply   
i usually recycle aluminum cans...
Old     (mikeski)      Join Date: Aug 2003       03-31-2005, 10:13 AM Reply   
sounds familiar...

I bought a cotton wheel and put it on one side of my old grinder. I have been using it to polish some brackets I made out of aluminum angle. You probably need to first sand out the rough spots if there are any, use a fine emery cloth. Next use a stiff wheel and a heavy rouge to do the rough polishing. Finally you can hand polish out the machine marks using a cloth diaper with Mothers or Hapich Semi-Chrome coupound. If you take your time and work the process through the cans will look better then new, waaay better.
Old     (antbug)      Join Date: Jul 2004       03-31-2005, 10:31 AM Reply   
get ready to get dirty... really dirty
Old     (sbt3)      Join Date: Jun 2002       03-31-2005, 12:24 PM Reply   
At one point I polished a ski pylon that was in my boat. I wet sanded it with 1500 then used mothers aluminum polish. It worked pretty good. I guess it depends on how deep the scratches that you have are. The mothers aluminum polish works pretty well, I would try that first. I also used it on my board racks to get rid of some of the water stains. Here are a couple of pics of the pylon I did.

Old     (skibum69)      Join Date: Aug 2004       03-31-2005, 12:32 PM Reply   
thanks for all the help, I'll try just polish first since they scratchs aren't deep.

(Message edited by skibum69 on March 31, 2005)


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

All times are GMT -7. The time now is 9:53 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home


© 2016 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us