Wake 101
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through May 04, 2005

Thread Tools Display Modes
Old     (rich_g)      Join Date: May 2003       04-03-2005, 5:31 PM Reply   
Who makes the trailers for Centurion?

I have a 98 Elite-V (21')and have gone w/out a trailer since I've had it. I have a boat dock w/ lift, and access to a 23' Malibu trailer if I have to take it in. I have taken measurements off the bu, but it's not a perfect match. I bought a used 21' trailer that was for a MB Sport. The bunks are totally different and won't work for me.

I'm re-doing the bunk design, new uprights, bow stop, etc. It's fairly challenging - boats are so 3-dimensional ya know. If I could get a basic drawing from the mfg, I could hand it to my welder buddy, then I'd be home free. Any suggestions of who to call. Thanks
Old     (swab791)      Join Date: Mar 2005       04-03-2005, 7:04 PM Reply   
Well since you are driving a TIGE 21I (EXACT SAME HULL MADE IN THE SAME PLANT) You might want to check out the local TIGE DEALER. Or the TIGE Plant in Texas.
Old     (ef3529)      Join Date: Nov 2003       04-03-2005, 8:19 PM Reply   
If you are in Texas, Boatmate in Knoxville makes it.
Old    jmac_04            04-04-2005, 12:00 PM Reply   
Magnum Trailers located in Austin Tx make a trailer for Centurion. That is what my Centurion is on.

Old     (breadbutta)      Join Date: Dec 2003       04-05-2005, 7:19 PM Reply   
Maybe these will help

(Message edited by breadbutta on April 05, 2005)
Old     (breadbutta)      Join Date: Dec 2003       04-05-2005, 7:21 PM Reply   
Here's the tag

Old     (rich_g)      Join Date: May 2003       04-06-2005, 6:35 AM Reply   
Bruce, thanks for the personal effort. That helps. I doubt that the mfg will give me their specs, but I can get pretty close by looking at different pictures. I'm not close enough to a dealer to make a visit very practical.

The skeg on my boat will be directly above the front axle. How much up & down motion do you get on the axles; normal leaf spring tandem setup? How much clearance should I build into it?
Old     (kstateskier)      Join Date: May 2002       04-06-2005, 11:34 AM Reply   
Both our promo boats were on Boatmate trailers. Both were made at the NC plant though.
Old     (breadbutta)      Join Date: Dec 2003       04-06-2005, 4:31 PM Reply   
Rich, Not much movement, from what I can remember. In the third picture you can see the cross member in the middle is a lot lower than the others, probably about 4 inches. Is it possible to move the boat forward or backward so the axle is between the skeg?



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

All times are GMT -7. The time now is 2:35 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home


© 2016 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us