NEW VIDEO: Pleasanton Sliders / Rewind Winch

(dcervenka) · (dcervenka) **Join Date: Sep 2002** 02-25-2005, 11:37 AM

Rewind Winch, Hypelite Roam, Wakeskating, and a wreck or two...

http://www.dpcfilms.com/VideoPlayer.asp?i=127

Now you can watch any of our videos in FULL screen mode; Start the video and then click the button shown below. To get out of FULL screen mode hit the "ESC" button on your keyboard.

(Message edited by dcervenka on February 25, 2005)

(dakid) · (dakid) **Join Date: Feb 2001** 02-25-2005, 11:53 AM

nice work kung fu!

(wakeparent) · (wakeparent) **Join Date: Jan 2005** 02-25-2005, 11:55 AM

What kind of winch are you using in the video? Is it just a regular warn? Very cool looks like everyone had alot of fun. the guy with three knee's must of had the most fun.haha

(lzyboy) · (lzyboy) **Join Date: Jun 2001** 02-25-2005, 12:58 PM

SIK WORK bro.... I recognize that pond, LOL - P-town for sure... I've been eyeing those ponds for a while, props for making it happen, looks like it was a good time... Keep up the vids, sweeeeeet!

(lzyboy) · (lzyboy) **Join Date: Jun 2001** 02-25-2005, 1:00 PM

btw - That winch seemed to be a lil jumpy at the start & is there a way you can adjust the speed?

thnx - Lzy

(antbug) · (antbug) **Join Date: Jul 2004** 02-25-2005, 1:04 PM

as always sick video!

(brinks) · (brinks) **Join Date: Mar 2002** 02-25-2005, 1:18 PM

Sick vid. I can't wait to see your DVD when it comes out. I always like watching your cuts.

(guido) · (guido) **Join Date: Jul 2002** 02-25-2005, 1:38 PM

Nice Dave.... That's a sick vid. Those guys were working that place. What happened with the new slider?

(dcervenka) · (dcervenka) **Join Date: Sep 2002** 02-25-2005, 2:33 PM

Joe, Ant, Brinks - thanks!

Gordie - That's one of the original Rewind prototypes which the Olesiewicz's picked up in FL.

Aaron - The snap is from all the slack in the line (these guys are at least 150 feet out so it would be expected). There is a throttle control which allows you to control the speed, but it takes some practice to get it just right. Many Thanks to Tim Olesiewicz for running the winch all day! It's a lonely job, but he was there day after day!

Evan - Believe it or not after all that hard work the riders and Sean B put into building the big slider, it got pulled the following week. Actually all the sliders got pulled by the development company...

(burbanized) · (burbanized) **Join Date: Mar 2004** 02-25-2005, 2:36 PM

SWEEEEET

(airwarrior04) · (airwarrior04) **Join Date: Aug 2004** 02-25-2005, 4:38 PM

I think i saw those sliders on the way to the boatshow are the next to the free way? by the way SICK VID!

walt 02-25-2005, 5:51 PM

That was great !

(jarrod) · (jarrod) **Join Date: May 2003** 02-25-2005, 9:58 PM

Dave: Your editing just keeps getting better and better. Incredible talent.

I love the shot where you zoom in on Arun's camera display, then disolve to the video of the same shot.

polskadan 02-26-2005, 8:59 AM

NICE VID!

(twitch) · (twitch) **Join Date: Dec 2004** 02-26-2005, 6:12 PM

Sweet vid dude... thats gotta suck for that poor roam... couldnt you guys be nicer to those boards... they got feelings too

(512boarder) · (512boarder) **Join Date: Jul 2004** 02-26-2005, 7:34 PM

what is the gearing on each of the sprockets on the motor for that winch?

(dcervenka) · (dcervenka) **Join Date: Sep 2002** 02-28-2005, 9:04 AM

Another Arun Frances Kodak moment…. The pics are up now!

1) http://www.dpcfilms.com/Photos.asp
2) Click on "Pleasanton Sliders / Rewind Winch"

J-Rod - Thanks!
Zack - Yes, right off the 680
Nick - I'll find out and let you know..

If anyone is interested in purchasing a winch, shoot me a PM.

(sb1) · (sb1) **Join Date: Aug 2002** 02-28-2005, 11:35 AM

R.I.P.

again, great job on the vid Sr. DPC!

(eddie1173) · (eddie1173) **Join Date: Dec 2003** 02-28-2005, 1:35 PM

I drive by there every day & could see the sliders from the free way but i haven't seen them in a week or two.

(dcervenka) · (dcervenka) **Join Date: Sep 2002** 02-28-2005, 1:36 PM

yes a very sad day!

Even though I only knew this slider for 5 hours, it will truly be missed!

All joking aside, this slider was built by Sean B, Justin F, and Ricky A and took a better half of a weekend to build, no power tools (just a cordless drill) so you can only imagine how much fricken sawing had to be done.. It was hit once by Justin F and then torn down the following week...

Just another sad day in the life of a slider..

(guido) · (guido) **Join Date: Jul 2002** 02-28-2005, 1:41 PM

Man... That kills me. I guess it was inevitable that the sliders would be pulled sometime, but it sucks that nobody got a chance to hit that thing. It looked sick.

We need to round up some people and build out at the Delta again.

(dcervenka) · (dcervenka) **Join Date: Sep 2002** 02-28-2005, 1:51 PM

Justin hit it once, but because he was coming off his "3rd knee" injury we didn't want to risk it.

Definitely... (Mental note: bring a generator that works..

)

(eddie1173) · (eddie1173) **Join Date: Dec 2003** 02-28-2005, 1:56 PM

That sucks. It takes time to build just to get torn down.

I was looking at another video clip you had from Los Banos. Thats my friend dougs place & thats one of my other friends phil riding the honda 50. I was there a couple months before that when Ricky A. & Ricky Gonzales was there. They were hitting a slider that was by where the car slider was.

(dcervenka) · (dcervenka) **Join Date: Sep 2002** 02-28-2005, 3:42 PM

Edward - How's the slider situation looking in Los Banos these days? Any new ones up?

(solo) · (solo) **Join Date: Oct 2001** 02-28-2005, 4:32 PM

Fu,

Got your e-mail, sorry for no response. The vid is sick as usual. Hit me up when you get a chance.

Hahn

(eddie1173) · (eddie1173) **Join Date: Dec 2003** 03-01-2005, 6:42 AM

Kung Fu- I haven't been down there in awail. My friend Doug had knee surgery & is going to start riding in a month. So if there's not some new ones up yet. I'll have to go round some friends up & go help doug get some new sliders built.

(dcervenka) · (dcervenka) **Join Date: Sep 2002** 03-01-2005, 8:14 AM

Ed- Cool, I shot you an email

Master Rail Builder, The One, The Only... Sean B (Donut Shop Productions..)

wakeboardn4life 03-02-2005, 12:28 PM

awesome vid whats the name of the song used for that vid

(dcervenka) · (dcervenka) **Join Date: Sep 2002** 03-02-2005, 1:59 PM

Chemical Brothers
Push The Button
"Galvanize"

(dcervenka) · (dcervenka) **Join Date: Sep 2002** 03-07-2005, 8:58 AM

Some cool desktops of Chris Olesiewicz from this winch session: http://www.dpcfilms.com/Downloads.asp

(jrad) · (jrad) **Join Date: Mar 2004** 03-07-2005, 10:43 PM

dude, you guys got it goin on, that video was way tight.

penny4urthots 03-08-2005, 12:30 AM

Kung Fu -

2 words .... HHEEEIIII YYAAAAAHHH. So sick it's gross, no joke. I want to know about how to purchase one can you help me with an info?? Drop me a note if you can Linc@salinasvalleymarine.com

We are gonna have a gnarly little rail demo @ our Pre Season Sale this year in a drainage ditch in front of our shop in Salinas. Maybe you guys wanna come check it out?? Hit me up guys...

(dcervenka) · (dcervenka) **Join Date: Sep 2002** 03-16-2005, 1:49 AM

skiBOREDr4LiFe - Thanks! I'll see you guys down there!

(larry6) · (larry6) **Join Date: Oct 2002** 03-22-2005, 8:54 PM

Kung Fu sick as always bro.. great editing man..