Skylon tower speakers

Need some help.
I currently have 2 Skylon 350's installed on my tower with seperate amp.
Still have factory JL Audio amp with 4 6 1/2's and 10" sub.
Also, a 10" P3 with matching amp in the locker.
Total of 3 amps, (2) 10", (2) 350's, (4) 6 1/2's.
Still only have 2 batteries.

Just picked up a 450 to install in the middle of the (2) 350's.
What is the best amp setup to consolidate?
Will I need a 3rd battery now?

I haven't looked in a while, but what ohm are the 350's? I have a pair of the 450's and they are 3 ohm. It's retarded, I know, but it is what it is. Skylon told me to make sure the amp would go down to 2 ohms, just to be safe. Make sure you take that into consideration when looking for an amp.

i have a 450 and 2 350s on my boat.three 12's and two sets of seprates.1 amp 1000wts to my 450,1000watt amp to the 350s 1 amp to the sets of seprates and two amps to the 12's.got 2 batteries still.its way loud and clean.lasts fine

Dirty30 - Any pics of your setup? What amps?

how do i post pics?

Click on upload attachment then browse for the picture you are after. You may have to compress and resize it to accommodate the site requirements.