Hyperlite System Bindings on Hyperlite board Strata mount

(04outback) · (04outback) **Join Date: Jul 2007** 04-21-2011, 10:36 AM

Just got in my Hyperlite System bindings and Murray boots. Going to mount them on a Hyperlite Marek NOVA with the Strata mount.
SO, Strata mount has two sliding T Screw mounts per side..
System bindings has 4 SCrew mounts (2 inside and 2 outside).
Called Hyperlite, CS guy says, uh let me ask, comes back and says use only the 2 inside screws...
Hmm.. ANYONE have any feedback on this?
I was thinking the outside over the inside, or even requesting extra screw slides to use all 4..

Love hyperlite gear, but always lacks any instructions on mounting, etc.

Anyone who has experience with the System and Marek Nova or Murray Nova with Strata mount, would love a little feedback on this. Won't see water for at least another month..SNOWED AGAIN TODAY! UGH

(jason95gt) · (jason95gt) **Join Date: May 2006** 04-21-2011, 1:32 PM

Use the two inside holes as they were designed that way.

(ponder86) · (ponder86) **Join Date: Mar 2008** 04-21-2011, 2:28 PM

Yeah, the inside ones are made specifically for the strata mount.

(Musgrove) · (Musgrove) **Join Date: Dec 2010** 04-21-2011, 5:13 PM

i checked out the system on a regular murray 2011 it was sick just the clips on the bindings get stripped off after time

(dirwoody) · (dirwoody) **Join Date: Apr 2003** 04-21-2011, 7:31 PM

Any idea if these will mount to an old roam - I know I have a terrible time getting 6" plates to fit these boards, as I have to use spacers - so any idea if these mount right up (god I hope so, they're already on the way and you can't pry me away from my roam for the cable!)

(wakerider111) · (wakerider111) **Join Date: Jul 2006** 04-21-2011, 11:08 PM

thought i remember reading that the inside ones are for strata and the outside ones are for traditional mounting on other boards

(bobbysky) · (bobbysky) **Join Date: Aug 2010** 04-22-2011, 3:00 PM

I just got the 11 marek board, system bindings, and marek boots. My shop gave me 4 extra inserts and bolts. I used both the inside and outside. And make sure you use the shorter bolts for the inside or you'll screw through your core.

(04outback) · (04outback) **Join Date: Jul 2007** 04-23-2011, 7:55 AM

thanks...
got to playing with them and read the inside of the bindings to see "STRATA MOUNTING"

I do think I would long term think I would like the 4 screw mount ..

Now just need something warmer than 50 degrees and 40 something water!!

(saundo) · (saundo) **Join Date: Nov 2010** 04-26-2011, 2:22 AM

i used the two inside mounts on my marek nova and bent one of the spacers and flatted all the groves on the inside , they are to small. so i just used the two outside ones and havent had any trouble since then