|
Hey guys, yet another boat project.
Looking to install a new ballast system on my 2005 Tige 22V and even though I've done around 10 ballast systems I still have a couple questions.
1. Any advantage to filling from the back of the boat vs the bottom?
2. I'm using Tsunami 800 pumps. Has anyone used these to go through the hull, as opposed to using the mushroom type fitting? (Only if installed on the back of the boat)
3. I bought enough components from wakemakers to do a three bag system, there isn't much room under the front seats, so I'll fill that with sand bags, thinking about having a bag in the front walk way. Should I drill a couple holes in the wall next to the drivers console for fill and empty lines or would that look too ghetto?
|
Threaded Mode