dash switch cover

Does anyone know where to find these on the internet? Basically they are covers that snap on to the switch. I don't need the switch, but just new covers.

I typed in marine switch covers & here's one that I got:

http://www.danamarineproducts.com/RockerSwitches.htm

hmmm, thanks, looking for more of this type that has the ballast lettering on it, etc...

I figured. That's all I could come up with online though. What kind of boat are the pics from? I could go off of that better.

I've looked before, you're best going to the dealer.. I believe the covers are custom printed by the switch manufacture for the boat manufacture. The dealer will probably nab you $8-18 a cover.

The manufacture of the switch is a company named Carling Technologies. The switch is a Contura IV.

Mouser's catalog page for the switch.
http://www.mouser.com/catalog/629/1346.pdf

Here's the manufacture product litature on the switch:
http://www.carlingtech.com/pdf/CarlingSW_V4_5.pdf

Here's the manufacture's switch cover options:
http://www.carlingtech.com/pdf/vl_serswitlegends.pdf
(finding these covers is a different story)
try: www.digikey.com
www.mouser.com
www.alliedelec.com

I got mine through the dealer in Dallas

just ordered a new VLX
I'm guessing that you plumbed in your locker sacs
did you drill a new through-hull, or tie into the MLS lines?

I'm sure I will cross that bridge soon
supposed to get the baot the first of May...trading in mt XTi
I did drill a through-hull in the XTi and used the Rival system
I pulled all of that gear..so I can use it in the VLX if I want
...not sure if I wanna get chastised by the dealer again

any pics and advice appreciated

nah, all the plumbing and tanks were already in the boat (automated from the MFG) when I bought it.

I just wanted to see if you could buy new switch covers online because they tend to get faded depending on the usage of the boat.