Ronix boot hardware change?

(cbkaboom) · (cbkaboom) **Join Date: Jun 2008** 04-19-2014, 2:38 PM

Did the size of Ronix's boot hardware change between 2011 and current? The hardware fits perfectly on my Company Vandall Limited, but seems to be too big for my 2013 Hyperlite Marek? Won't wind in more than a single turn and I really don't want to cross thread the hardware.

(stevev210) · (stevev210) **Join Date: Feb 2005** 04-19-2014, 2:48 PM

Your 2013 marek has metric threads. Sounds like your trying to thread in the old standard hardware. In 2013 ronix switched to metric because of the thinner boards but still wanted a high thread count.

(stevev210) · (stevev210) **Join Date: Feb 2005** 04-19-2014, 2:52 PM

Quote:

Originally Posted by cbkaboom

did the size of ronix's boot hardware change between 2011 and current? The hardware fits perfectly on my company vandall limited, but seems to be too big for my 2013 hyperlite marek? Won't wind in more than a single turn and i really don't want to cross thread the hardware.

^^^^^

(baitkiller) · (baitkiller) **Join Date: Jan 2010** 04-19-2014, 3:18 PM

M-6

(Jmaxymek) · (Jmaxymek) **Join Date: Feb 2012** 04-19-2014, 8:36 PM

The above is correct. Your Vandall is going to be 1/4-20 hardware, while your Marek is Metric M6. You're going to need to order some M6 hardware or head down to your local shop and pick some up. Most if not all of the industry moved to M6 right around 2012.

(cbkaboom) · (cbkaboom) **Join Date: Jun 2008** 04-20-2014, 9:05 AM

Thanks guys! Guess I'm just behind the times!