|
Join Date: Nov 2012
11-05-2012, 6:55 PM
|
Reply
|
Just bought some rev 10s..what are you guys doing for a break in period
Thanks
|
Join Date: Feb 2012
11-05-2012, 7:14 PM
|
Reply
|
i played mine for a full day at the lake about 8 to 10 hours at about 1/2 volume . then pounded thier guts out ever since and hadnt had a single problem. running a 750/1 jl audio per pair
|
Join Date: Nov 2012
11-05-2012, 7:42 PM
|
Reply
|
Thanks
|
Join Date: Apr 2005
11-06-2012, 1:23 PM
|
Reply
|
I haven't really noticed any difference from brand new to broken in. I played them low for about 15 hours before I cranked them for a long time. Next to FAE, they've been my favorite upgrade to the boat in seven years.
|
Join Date: Nov 2012
11-06-2012, 4:47 PM
|
Reply
|
I was told if I just cranked on them I would burn the coil up
|
Join Date: Feb 2012
11-06-2012, 7:46 PM
|
Reply
|
yea its possible, but i think that only happens with bad tunes. seriously, i have 4 rev 10s plus a 410 on my tower and i leave mine cranked 8 to 10 hours a day every weekend in the summer and yet to have problems. im running pretty big amps on them to, 750/1 jl hd per pair of rev 10s and the same amp again on a single 410.
|
Join Date: Jul 2008
11-07-2012, 5:57 AM
|
Reply
|
Jake,
Speakers must dissipate at least 95 percent of the energy they recieve as heat. Heat kills. There is no difference in the way a brand new and well used speaker handles the heat.
More heat is created when the speaker or amplifier or both are over-driven. Speakers compress with too much power. Amplifiers clip when driven too hard. It's an overly simply analogy but think of an electric drill. How much hotter does the electric drill motor get when you apply enough pressure to the chuck to slow it down over a long period? Speakers can most effectively get rid of the heat when they are in transition.
Break-in is just a matter of time at a normal level of play. Do nothing out of the ordinary.
The only difference will be from the added compliance of the mechanical spider which serves to damp the midbass cone. Depending on your crossover selection you might hear a small difference in the midbass extension.
David
Earmark Marine
|
Join Date: Nov 2012
11-07-2012, 6:19 AM
|
Reply
|
Ok I guess ill give it a couple of days at mid vol..the let her rip
|
Join Date: Jul 2008
11-07-2012, 6:25 AM
|
Reply
|
Again, play them from moment one the same way you will normally use them.
And be sure to change out the ferrofluid and filter after 15 hours of play.
|
Join Date: Mar 2002
11-07-2012, 7:00 AM
|
Reply
|
Jake, I think you missed the point that David was making. That guy really knows his stuff, so I'll give you the less scientific version: There is no break in period. Don't need to do it. Break in periods are for audiophiles and studio engineers. They just do it because of changing tonal qualities of the speaker.
|
Join Date: Nov 2012
11-07-2012, 9:58 AM
|
Reply
|
Yeah I missed it...got it now..thanks
|
Join Date: Jul 2008
11-07-2012, 12:00 PM
|
Reply
|
Lol, David that last line had me cracking up.
|
Join Date: May 2012
11-07-2012, 4:51 PM
|
Reply
|
Somebody, somewhere, is digging thru there speakers looking for a filter
|
Join Date: Jan 2011
11-07-2012, 6:51 PM
|
Reply
|
I have extra filters if anyone needs them. Just pay for shipping.
|
Join Date: Feb 2012
11-07-2012, 6:56 PM
|
Reply
|
i give mine a drink of coors light when they start smelling funny. works every time
|
Join Date: Aug 2003
11-07-2012, 11:08 PM
|
Reply
|
Just avoid playing country music and they will be fine.
|
Join Date: Jul 2008
11-08-2012, 5:56 AM
|
Reply
|
Well, that just leaves western.
|
Join Date: Oct 2007
11-08-2012, 6:34 AM
|
Reply
|
All I can say about the Rev-10's, is that Garth Brooks, David Allen Coe and Jamie Johnson never sounded better
|
Join Date: May 2012
11-08-2012, 3:15 PM
|
Reply
|
Right on the money Mike
|
|