Repairing a Tsunami pump

(wakemetoday) · (wakemetoday) **Join Date: Mar 2006** 04-02-2007, 9:41 AM

Anyone know how to get into a Tsunami pump? The wires going to the motor (I guess) are loose and causing the motor to die, so I took the top off and could not find any access to the internal potion of the pump. I can wiggle the wires and the pump will kick in but sooner or later the inevitably will happen.

(dubsac) · (dubsac) **Join Date: Mar 2006** 04-05-2007, 12:13 PM

You might try calling Barefoot International at (800) 932-0685. I spoke to Mike yesterday about a similar problem (replacing the 12V plugs as mine are rusting from saltwater use) and he was helpful.

(wakemetoday) · (wakemetoday) **Join Date: Mar 2006** 04-05-2007, 1:35 PM

Thank You!!! I had given up hope.