My boat is mostly black above the water line (some white). The top side has started to dull a little, not really what I would call oxidized or chalky white though. The black on the side still has a fairly good shine. I want to get the top side looking good again and thought I would go with the 3M Finesse-It II followed by a good wax and or sealer. Should I use the Finesse-It just on the dull part or would it be OK to use on the whole boat before waxing/polishing? I'm not sure how abrasive this is. Any suggestions or other product recommendations. I know I don't need a HD rubbing compound or probably not even a cleaner wax as these would probably be more abrasive than I need. Thanks.
|