Wake 101
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through August 27, 2003

Thread Tools Display Modes
Old     (wakejunky)      Join Date: Apr 2002       08-15-2003, 6:57 AM Reply   
Just finished up my latest project on the boat. I made a sub box for the area between the driver's seat and the rear seat of my 03' SAN. Doubled my cup holder capacity and I now have wrap around seating like the older SA's. Took a bit of work but, managed to get 1.5 cu. feet total for .75 on two sealed sub drivers. Running the Dayton Quatro drivers which have a recommended .35 cu. ft. sealed box. Carpeted the thing and then ordered a seat cushion from CC.

Check out the pics.

No Slip Gator Grip

Old    clint_h            08-15-2003, 8:00 AM Reply   
Sweet Job!
Old     (dcervenka)      Join Date: Sep 2002       08-15-2003, 9:31 AM Reply   
nice work and very clean looking! I'm sure the person in that seat will be in for one hell of ride...
Old     (colorider)      Join Date: Jun 2001       08-15-2003, 11:13 AM Reply   
Give the person in that seat some rumble in the bumble
Old     (typhoon)      Join Date: Jul 2001       08-15-2003, 11:15 AM Reply   
did you port the cup holders?

great work...
Old    whitechocolate            08-15-2003, 12:05 PM Reply   
That Look's real good. What do you think it cost you to do the whole thing excluding the drivers,
What carpet did you use it looks like it matches perfect. It also looks like you used fiber glass resin to cover the MDF?
Old     (tlb)      Join Date: Feb 2003       08-15-2003, 12:17 PM Reply   
Mine's at West Coast now. You can start it next, Nice job.
Old     (wakejunky)      Join Date: Apr 2002       08-15-2003, 12:37 PM Reply   
Hey Guys,

Grant: I used a single sheet of 3/4" MDF, about 16oz of Resin, 4 cup holders and scrap carpet from the shop, cushion from CC. Mind you I work for CC so, I got the cushion at cost so, I'm into it for about $170.

Cup holders are completely separate from the sub boxes. I put a separate chamber just for the cup holders so, they are not part of the 1.5 cu. foot sub chamber.

No Slip Gator Grip
Old    joeblocephus            08-16-2003, 6:27 AM Reply   

Nice installation, looks great. Your occupation says engineer and you said you work for CC. Are you an} engineer for CC?
Old     (bruce)      Join Date: Feb 2002       08-16-2003, 2:35 PM Reply   
Chris, How does your SAN pull with the Lance? Which model of camper is that, a 920? We're still in a short bed 825 and like it although it is small with four.
Old     (wakejunky)      Join Date: Apr 2002       08-17-2003, 2:32 AM Reply   
Long story short but, I'm actually an out of work Test Engineer who is working at West Coast Correct Craft.
I have a Lance 2000 Lance 1120 a bit big for the SRW setup but, I've made enough mods to the truck's suspension and drivetrain to not worry about it too much.

No Slip Gator Grip
Old    endo            08-18-2003, 5:46 PM Reply   
Great work, but how does it sound? What are you pushing them with?
Old     (mastercraft7100)      Join Date: Jul 2002       08-18-2003, 5:52 PM Reply   
Do you have new picture of your boat?


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

All times are GMT -7. The time now is 10:34 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home


© 2016 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us