Does anyone know where I can get an underwater LED puck. I have seen them on Wetsounds Tige with the custom wrap. It is a round LED puck with a stainless ring around it at the base of the transom. Anyone... Bueller...Bueller...Bueller
The one on the Wetsounds Tigé is factory installed. Do a search for LED Underwater Transom Light. Perko is also making one now. Be warned they are not cheap, not at least the ones i've seen.
so if you went with two of the abysslites that are the spotlight ones that shoot 100 ft under water, could you light up the lip of the wake to ride at night? if so that would be crazy cool
I'm planning a project with three of the abyss 600's on my transom this winter. I wont know how it turns out until next season but in my research and for what I'm looking for they seem like the way to go.
MasterCraft uses 2 Abyss 600s. They look amazing. I would go with the white ones insteasd of the blue however. The picture is only one white 600. They are well worth the money if you are on the lake at night a lot.
The abyss are very affordable, so much so that it makes one question their quality. If it is a factory available option through Mastercraft, they must be a quality unit though.
I have installed many of them, and I can asure you they are of very high quality. They are very easy to install as well. I got to test a few different designs and these are by far the best option if you are not interested in drilling a monster hole in the boat.
Check out Aqualights picture pages also. They have a few pictures of a boat with the swim platform that rotates down to just below the water to let the waverunner off. How cool would that be to have the platform rotate down just below the water line at the lake. Just kickin back on it.
Yea i was going to ask that tim?? how confident would people feel drilling a 6 inch hole in the bottom of your pride and joy??????? i would feel much better cutting holes in my platform!!!!
The abyss is installed onto the transom of the boat. There is only one 3/16 hole that needs to be drilled through the boat. That is for the wire. The unit is screwed to the transom. It is not a thru-hull unit. Look at the instructions online.