Quote:
Originally Posted by tx_foilhead
Faria makes a nice one, the temp sensors have to be mounted in different locations from the transducer which is siliconed in. I put my air temp in air vent in front of the windshield and the water temp replaced the unused speedo hardware was replaced with the PP.
|
I was looking at that one as well, Is there any other place to mount the temp sensor aside from the transom? I don't want to drill a hole and have that ugly line back there. I was thinking of mounting it inside the raw water intake grate or somewhere in that hose before the engine? Not sure how it would stay in there though...most likely be a ghetto setup as well...