So I want to replace my ballast impellers. Right now I have the yellow for the two rear sacs in my 02 X-star that seem to work OK. I had the black impeller for my kgb and bow, but during spring inspection, I noteced it had two vains that were partially tore so I replaced it with my extra yellow impeller I had. The problem is, the yellow impeller would fill the kgb sac and bow sac, but not have enough pressure to empty it. I put the old black impeller back in and was able to drain the kgb and bow sacs. I've never had problems with my black impeller before, but switched to the yellow due to recommendations here. Now I hear the impellers are green. Stiffness half way between the black and yellow impeller or something like that? Is that the case and if so, where is the best place to get 3 quick. Thanks.
|