does anybody use one of these?

(jmunday) · (jmunday) **Join Date: Mar 2006** 07-10-2007, 9:27 AM

does this thing work? could I move my boat on gravel with it? thanks for your time

(psudy) · (psudy) **Join Date: Dec 2003** 07-10-2007, 9:29 AM

If you have a single axle, it should work fine. If you have a dual axle, it will be hard.

(peter_c) · (peter_c) **Join Date: Sep 2001** 07-10-2007, 9:32 AM

Doubtful on gravel. Those wheels will not roll well at all.

(psudy) · (psudy) **Join Date: Dec 2003** 07-10-2007, 9:43 AM

Missed the gravel part. What peter said.

(mkperceptions) · (mkperceptions) **Join Date: Jan 2007** 07-10-2007, 1:26 PM

havent tried mine on gravel but dont pay too much for one i got mine at harborfreight for like 40-50 bucks

(266crownlinebr)

Couldn't use it on the last boat. Had no front end weight on the tounge with a dual axle trailer. New boat is way to heavy. Also bought at harbor freight.

(treycleaton) · (treycleaton) **Join Date: Mar 2005** 07-10-2007, 7:25 PM

Well, that's exactly the problem....you bought it from Harbor Freight!

jk

(dudeman) · (dudeman) **Join Date: Mar 2005** 07-11-2007, 6:59 AM

Also bought one from Harbor Freight and use it to pull an '06 Supra 21v on a dual axle trailer out of the garage. That is on concrete though. You'd be hosed on gravel.

(jmunday) · (jmunday) **Join Date: Mar 2006** 07-13-2007, 4:50 AM

thanks for the response everyone.

(bazel) · (bazel) **Join Date: Oct 2001** 07-13-2007, 5:44 AM

I just got one for my 24 SSV. It is a bit tough but it is mainly just to move the toungue sideways about 2 feet to get the angle right for the garage. I am not sure I would want to use it for any disctance. I agree that the gravel would be very tough.

As a note I got the 600# one.

(wake_pirate) · (wake_pirate) **Join Date: Mar 2007** 07-13-2007, 9:37 PM

This works too, http://www.toolweb.com/itemdetail.cfm?partno=OTC1580