I am changing from a 03 Belmont 136 to a 04 Team 134. I remember that there's been a post saying the Hyperlite binding (I have a pair of Parks 04) won't fit properly by itself. How do I fix this problem?
Many thanks in advance for any help you can give me.
p.s. I am 5'8 1/2" and about 150 lbs. Will the 134 be too short for me? Or should I go for the 139?
herbilizer
(kristian)Join Date: Nov 2002
08-16-2004, 12:14 AM
The screws on the HL bindings are too long to the inserts of the LF board. So you can do as most and just put an extra washer on the screw. File the screw down or buy a shorter screw from a hardware store.
Not necessary kristian. At the hardware store here in town, they sell these half inch thick plastic washers. These things are the perfect size for Hyperlite bindings and liquid force boards. I had the same problem with some 3060s.