Got me thinking after reading the aluminum thread. I have a WakeAir tower on my Sanger and after changing biminis and relocating some racks Im left with bands of whatever you want to call it-almost like hard water but it wont polish out with the basics. Also parts of the tower never got the full polish it needed when it came from the factory so I want to hit these areas as well.
I can remove the tower and have a polishing shop handel it but was hoping someone here had some tips so I didnt have to go that route.
Try a product called BRASSO Metal Polish ,rest your arms ,then get a piece of steel wool and SCRUB!!! Then use some Liquid Glass Polish/Finish complete the process.Good Luck
Linear Mode
