Help, 2/3's of my dash is not working?!

(mike3500) · (mike3500) **Join Date: Jun 2008** 03-27-2010, 4:31 PM

So, I turn my Pergo switch on and turn the key... my fuel, voltage, and my digital hour meter are not moving or coming on. I have some juice, because my radio worked and perfect pass came on. Also, all the lights on my switches worked. We always keep the Pergo set on OFF, so the batteries have minimal drainage.

Back in late January (I know it was 2 months ago), all was good and my voltage was at 12.5 - 13, pretty much full.

I'm hoping this is only two dead batteries. Neither worked. Don't laugh, but could it be a fuse. I'm totally lost when it comes to stuff like this.

Any help would be greatly appreciated!!!!! Thanks a lot.

(mc_x15) · (mc_x15) **Join Date: Jul 2008** 03-28-2010, 3:46 PM

probably batteries. Charge em up and see if that helps. or maybe a bad ground.

(trdon) · (trdon) **Join Date: Sep 2007** 03-28-2010, 5:07 PM

What boat? If it is a nautique I would guess it is the gateway computer. Try the charging of the batts first.

(mike3500) · (mike3500) **Join Date: Jun 2008** 03-29-2010, 9:02 AM

Thanks guys. I can't take credit for the find, but it was only the kill switch. Just had to pull the tab and replace it. It just came loose. Excellent news!!