Currently I throw a 600 LB locker sack in my trunk. Im getting tired of filling and un filling the sack and dealing with the pump and hooking it up the ballast bag ect. What I was thinking is.
I removed my Stock ballast system. I still have the sea cocks with sea strainers attached to the bottom of the boat. The stock system had 2 sea cocks and strainers for 2 ballast pumps. They were for filling the ballast one for the left ballast and one for the right. Like I said I removed the stock hard tanks so I can use whats left of my system
What I was thinking I could do is
Get a custom sack with the quick dis-connects made for the trunk. Install a ballast pump omn my exixting sea cocks and stariners 1 that fills the sack and use the 2nd one attached to the 2nd sea cock for emptying. (will this work) do I ned a ven can I empty via the bottom of the boat or does it need a vent and need to go out the side? This way I quickly hook up the bag via the quick disconnects fill the bag and then when Im done attach the 2nd empty line and empty threw the 2nd sea valve?
I wanted to know what people thought of the Attwood pumps and quick disconnect valves?
Here is what my trunk looks like
Threaded Mode