Wake 101
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through March 18, 2009

Thread Tools Display Modes
Old     (sinister_designs)      Join Date: Feb 2008       06-03-2008, 1:40 AM Reply   
I have just recently purchased a 2006 Mastercraft X2 with the perfect
pass option however I am having a problem with the display
When I turn the ignition to "on" the perfect pass lights up and makes a
beep but nothing is the backlight is on and the whole
screen glow's a yellow/green color.
So I press the "on" button on the perfect pass display and it will beep
but still no display.
I have also tried it with the motor running albeit for only 30 sec or so
but still no display. The Volt meter in the boat is displaying 13 odd volts.
I have also checked the red power lead and it is reading 12.5 volts.
just wondering if anyone else has had this problem??

I have spoken to both perfect pass and my dealer just waiting for there reply's

Old     (06outbackv)      Join Date: Dec 2006       06-03-2008, 2:32 PM Reply   
My perfect pass is doing almost the same thing. When I turn the boat on the display glows green but nothing is on it and it produces a loud constant hum. I contacted Perfect Pass and they told me it sounded like the module was jacked up. I just sent the module off to them today so they can see whats up with it. My boat is an 06 as well.
Old     (w00taz)      Join Date: Jun 2007       06-03-2008, 3:14 PM Reply   
Take the battery to an auto parts store and have it tested.
Old     (sinister_designs)      Join Date: Feb 2008       06-04-2008, 12:02 AM Reply   
i hope it is not the module as the boat was a "new old stock" from the dealer so has had very little use
Old     (06outbackv)      Join Date: Dec 2006       06-04-2008, 6:09 AM Reply   
My boat only has 30 hours on it and the perfect pass has already pooped out.
Old     (jaybee)      Join Date: Aug 2007       06-04-2008, 6:42 AM Reply   
Does anyone else get moisture in their screen. Mine is starting to get pretty bad and wondering if there is a way around it or whether the cover will just pop off and i can wipe it off?
Old     (sv216)      Join Date: May 2008       06-04-2008, 8:36 AM Reply   
Don't feel bad, my boat had 4hrs on it when the servo motor seized up. I called perfect pass and spoke to Arron and he said to pull it apart ond try to free it up and it may last for another week or two untill I take it in for my service. It was full of moisture and the tolerances are so tight that it don't take much to corroede the servo and seize. My new one I will add some silicone around the end caps of it to help seal it up. It had some but obviously not enough.
Old     (sinister_designs)      Join Date: Feb 2008       06-04-2008, 2:25 PM Reply   
hmmmm so perfect pass seems like it has quite a few problems then.
Old     (perfectpass_pro)      Join Date: May 2008       06-09-2008, 7:19 AM Reply   
The servo motor is one of the more problematic parts of the system. But let's not get to many problems mixed together. The key to diagnosing a gauge problem is... do the buttons still beep? Check the connection to the MasterModule to ensure the plugs are securely connected.

P.S. In the case where you are getting a constant tone, that is a module problem.

Old     (sv216)      Join Date: May 2008       06-09-2008, 8:27 AM Reply   
No, I wouldn't say PP has quite a few problems. A few issues here and there just like any other product on the market, think how many are out there that haven't had any problems. Of coarse you only here about the issues not about the systems that work flawlessly. Service is A+...
Old     (hamkj)      Join Date: Apr 2002       06-09-2008, 10:07 AM Reply   
YES ACE IT DOES. Good observation. Perfect Pass is put in almost every tournament boat known to man... and you have read a thread that has about 3-5 people who have had problems... and you comment that is has a lot of problems...

"hmmmm so perfect pass seems like it has quite a few problems then."

I think alot of problems are user error or not reading the manual...

Just out of curiousity... is less than 5% problems considered a lot? or less than 1%... or more...or less?
Old     (guitsboy)      Join Date: Aug 2005       06-09-2008, 12:59 PM Reply   
If you have a newer multi line display / gauge, you need the newer software, 6.5 I believe. If you have an old master module, and have not replaced the chip, then a newer gauge will only light up and beep, but will not display anything. Im going through this very same thing as we speak.
Old     (w00taz)      Join Date: Jun 2007       06-09-2008, 3:42 PM Reply   
I just got off the phone with them too. I installed the stargazer system in my boat a couple weeks ago. Be careful how you route the new signal cable going from the computer to the in dash display. My screen hoses up and turns off eventually. I have good power in my boat good alt starts fine every time. They said it's likely signal noise from an adjacent cable to the perfect pass display cable.
Old     (sinister_designs)      Join Date: Feb 2008       06-11-2008, 4:20 AM Reply   
Easy big fella
This is my first boat with perfect pass and it had a bad gauge from the dealer.. As far as problems I myself have been in 4 boats over the last 6 months and all had had problems of one kind or another with the system so my personal experience is prob not the best. I do however think that is the best system available and will continue to use it and recommend it to others.
btw I would class less than 1% as a few
more than 5% as a lot
and I would agree that 3 people replying that they have problems is not a lot but I never said it was a lot either.
Old     (guitsboy)      Join Date: Aug 2005       06-11-2008, 4:23 AM Reply   
Yes, ive had a couple defective pieces as well. Their customer service is good, however the fedex shipping charges are what kills you.


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

All times are GMT -7. The time now is 3:30 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home


© 2016 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us