Articles
   
       
Pics/Video
       
Wake 101
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > >> Wakeboarding Discussion Archives > Archive through August 21, 2008

Share 
Reply
 
Thread Tools Display Modes
Old     (jjakober)      Join Date: Apr 2002       07-25-2008, 8:49 AM Reply   
Looks like DW is getting a new ride for 09!

http://www.alliancewake.com/video_details.php?id=3956&page=1
Old     (johnsvt)      Join Date: Dec 2006       07-25-2008, 10:02 AM Reply   
Nice
Old     (joshugan)      Join Date: Apr 2005       07-25-2008, 11:02 AM Reply   
Wow!! Amazing riding. J, do you know if this will be based on the Natural or will it be a different shape? Any ideas on fin pattern?
Old     (srh00z)      Join Date: Jun 2003       07-25-2008, 2:52 PM Reply   
I have always liked Watkins' riding, but I enjoyed that section more than I usually do. I tried to pause a few times to see the board, but I couldn't tell much. Looks like a new tip/tail and I didn't see as many molded fins unless I missed them.
Old     (ironj32)      Join Date: Jan 2007       07-25-2008, 4:05 PM Reply   
a fly on the wall told me that they actually are redoing that board from the ground up. the original "insert board name" (sorry guys, my lips are sealed) was too much like the natty i believe...they wanted to make it really out perform the natural. i wonder if the one he's riding is the finished product or if it is still in design?
Old     (andrew_moreton)      Join Date: Feb 2003       07-25-2008, 5:14 PM Reply   
Yeah and that X-Star wake looks clean
Old     (da_kamp)      Join Date: Jan 2008       07-25-2008, 6:44 PM Reply   
Dope video, likin the design on the top of the board, not so much the bottom, definitly saw two flutes per side on the top though so that'll most likely give some big pop. Really Hard to see if there is any molded fins though with that color
Old     (lsukuntryboy)      Join Date: Jul 2007       07-25-2008, 7:30 PM Reply   
dies it say "decade" on the bottom of the board? or do i need to go put my contacts in?
Old     (wakerider111)      Join Date: Jul 2006       07-25-2008, 7:38 PM Reply   
This is the best snap shot i could get of the board's bottom... i think... i'll watch and pause again here and there and see if i can get better

looks like there is some Delta pattern there?
and it looks like there is two molded fins on each end? instead of the 4 like on the player and natty

what does it say on the bottom though? looks like some "D"s and some "C"s and some "E"s and a "V" maybe ?.... OHHHHhhh WAIT. It is not a "V" it is an "A"
"DECADE"

and then the smaller word beneath... "watkins" maybe?
Upload
Old     (wakebrdr38)      Join Date: Sep 2006       07-25-2008, 7:42 PM Reply   
4 molded fins and it says decade. also looks to have the chevrons. dont ask me how i know, i got really lucky and paused it at just the right time and it wasnt as blurry. i paused it on the pete rose in the first quarter of the film
Old     (wakebrdr38)      Join Date: Sep 2006       07-25-2008, 7:43 PM Reply   
ahh you beat me to it. looks like the natural to me
Old     (wakerider111)      Join Date: Jul 2006       07-25-2008, 7:47 PM Reply   
and the topUpload
Old     (lives2wake)      Join Date: Apr 2002       07-25-2008, 8:02 PM Reply   
Awesome riding. I haven't seen any of his video sections. This was good. I like the big nose grab roll to blind.
Old     (aussie_stu)      Join Date: Sep 2002       07-25-2008, 9:40 PM Reply   
just saw that board in the flesh yesty out here, 2 moulded fins, chevrons between the fins, very tidy lookin deck, the proto's of his boots look schmick too

(Message edited by aussie_stu on July 25, 2008)
Old     (adam_balon)      Join Date: Jul 2003       07-26-2008, 11:31 AM Reply   
kinda looks like a watson mixed with a witness.
Old     (pyrosmurf)      Join Date: Apr 2002       07-26-2008, 1:41 PM Reply   
The actual finished board won't have those molded fins, that was one of the design changes.
Old     (wakerider111)      Join Date: Jul 2006       07-26-2008, 9:05 PM Reply   
no molded fins?
wow, that is almost un heard of, maybe that means that there will be multi-bolted-on (2 on each end) fins instead?
Old     (kristian)      Join Date: Nov 2002       07-26-2008, 9:33 PM Reply   
"won't have those molded fins"
Josh didn't say "it won't have any molded fins"
Old     (jjakober)      Join Date: Apr 2002       07-28-2008, 2:00 PM Reply   
Josh,

DW always bases his stuff off of his previous rides and then tries to build on it and make it even better!

Option-->Player-->Natural-->??

He has been doing this for ten years and every new board of his gets better and better, I'm looking forward to checking it out when he gets it all dialed in!

Reply
Share 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 2:00 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2019 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us