|
Looking for any advice or help on how to fix my depth finder. The depth was spot on since I bought the boat until recently it will read 997 ft most of the time. Every now and then it will start working again but not for very long. I'm thinking that there is a bad connection somewhere between the transducer and the computer MDC box thingy. The depth reads the same both in the info center and in the speedometer display so I dont think its a gauge or display isssue. Does anyone know where the transducer is located in this boat? I took a quick look in the engine compartment and under the tranny but did not see it.
Yes the boat is still under warranty, but I'm really hoping to avoid taking the boat off the lift and hauling it to the dealership.
|
Threaded Mode