4 pin 10 Guage Tower Light Connector

(big_poppa_pump)

Anyone have any ideas where I can find a tower light connector with 4 pins that I could put between the tower and hull.

I don't want the type that mounts into the hull on one end either....looking for the type that connects up to loose wires on both ends.

There are a lot of connectors I have looked at, but none accept 10 guage wire.

Thanks

swass 01-26-2005, 1:14 PM

Did you try Neutrik?

http://www.neutrikusa.com

(big_poppa_pump)

I paged through their products but didn't find anything that jumped out at me as 4 pole that accepts 10 guage wire. Most of their connectors are 14-16 which just doesn't cut it.

I should problably hit up their distributor and see if they can point me in the right direction.

(wakeeater) · (wakeeater) **Join Date: May 2002** 01-26-2005, 4:43 PM

NLT4FX-BAG and NLT4MX-BAG
on
http://www.neutrikusa.com

that wat your looking for right?

(mikeski) · (mikeski) **Join Date: Aug 2003** 01-26-2005, 4:52 PM

They sell them through www.partsexpress.com, nice connectors.

(lukeduke95) · (lukeduke95) **Join Date: May 2002** 01-26-2005, 7:21 PM

dude! try some trailer plugs from Kragen!! They can do some decent wire.

(big_poppa_pump)

By jove I believe Charley has found it. 4 pole, takes 10 AWG just like I wanted.

Thanks for posting those part numbers bro!! I will order a pair up.