Articles
   
       
Pics/Video
       
Wake 101
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Share 
Reply
 
Thread Tools Display Modes
Old     (j_trip_33)      Join Date: Jun 2006       04-26-2012, 11:55 AM Reply   
I feel dumb for asking, but my throttle was acting up last weekend and I discovered the throttle housing/perfect pass control came loose from the mounting position. We had to manually adjust the knob to get the throttle cable back in line with the actual movement of the throttle by the driver. Does anyone have a picture of where this should be mounted? Boat is a 2003 Supra SSV with Indmar with Perfect Pass (I think it was called Wakeboard Pro). Any help is greatly appreciated.
Attached Images
   
Old     (wdr)      Join Date: Dec 2011       04-26-2012, 12:48 PM Reply   
Jamie, believe it or not as I recall when the dealer installed my WBP/PP on my '06 Moomba OBV, the servo/body was zipped tied to a radiator hose at the rear of the block. Looked kind of hinky but I never had a problem with it in 4 years. Look for some dead zip ties on the block or in the bilge and some attachment marks on the hoses, bet you figure it out.
Old     (wdr)      Join Date: Dec 2011       04-26-2012, 12:52 PM Reply   
Jamie after looking closer, it may have been attached using hose clamps. The *** on the curved piece just to the left of your thumb in the first picture would of been where the clamp went over. Most likely a corresponding *** a the 6 oclock position in that photo as well. Can't spell t1t on this site I guess

Last edited by wdr; 04-26-2012 at 12:54 PM. Reason: word content
Old     (bull)      Join Date: Jul 2006       04-26-2012, 6:39 PM Reply   
Here's a pic of attachment on my 2003 ssv - it attaches via hose clamps on the port side of the hose exiting the thermostat housing.
Attached Images
 
Old     (j_trip_33)      Join Date: Jun 2006       04-27-2012, 2:45 PM Reply   
Ryan - thank you very much for posting the picture.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 5:01 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2019 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us