Boat: 08 Sanger V215
Recently went to the lake and was quarantined (mussel inspection) because of approximately 1 cup of water in the front ballast bag. I attempted to pull the bag out, but it did not want to come out. Does anyone know how to remove the front factory ballast bag?
It appears it is held in place with the plumbing lines looped around the floor supports and I cannot reach the front to loosen the hose clamp to undo the front fill. Assuming it is not glued the only option I can think of is to cut the fill line and re-plumb, which I would like to avoid.
Thoughts on how to remove the bag or get every last drop of water out?
|