Issue with 2011 Ronix Cell

(duffy) · (duffy) **Join Date: Feb 2006** 06-19-2011, 7:46 PM

I just bought the 2011 Watson with the 2011 Ronix Cells. The bindings are super comfortable and I like them alot, however I noticed today after I was done riding the bindings were lose. I tried to tighten them down but they were already tight. I took the screw out with the keeper and noticed the keepers splines were worn down. The splines on the boot are metal or whatever, but the keeper is plastic. Doesnt' make much sense. Anyone else having this issue?

(Quinten1993) · (Quinten1993) **Join Date: Jun 2010** 06-21-2011, 2:19 AM

Ronix don't juse metal in there bodem plates, i have the cell 2010 and the one 2011 and don't have the problem, the plate where the screw is attached, the teeds are plastic by me and the bolt holder to. Get to your local shop and ask for warranty or by new bolts.

(I undersood it are the bolt keepers, english is not verry good)

http://www.ronixstore.com/products/p...31.0.0.0?pp=8&

(501s) · (501s) **Join Date: Feb 2010** 06-21-2011, 10:26 AM

On a LF board with Ronix bindings, you need to grind the screws down about 1/8" because they bottom out in the inserts. I had the same problem with my 2011 Ronix Ones and a LF watson Hybrid. or buy new shorter screws.