Low tranny oil press breaker on a Sanger

(tazz) · (tazz) **Join Date: Oct 2003** 05-08-2005, 8:18 PM

I had my pannel on my 02 v-210 off today to check a wiring issue i am having. the boat has switchs installed in the pamel for ballest and I needed to make a change. I noticed that the breaker to the right of the low tranny oil pressure light was not connected to anything??. I'm guessing the low pressure light is run though this breaker but I'm not sure. Their is a lot of mods on this pannel due to the extra switchs and anything could have been changed. Anyone been into there left panel on the sanger and able to tell me what this breaker is supposed to be hooked to?? Thanks

(ralph) · (ralph) **Join Date: Apr 2002** 05-08-2005, 10:29 PM

Pretty sure the breaker should be hooked to the lighter socket.

(tazz) · (tazz) **Join Date: Oct 2003** 05-09-2005, 8:17 AM

The lighter socket has its own breaker. as you look at the dash, from left to right its lighter socket, breaker, tranny light, breaker.

(ralph) · (ralph) **Join Date: Apr 2002** 05-09-2005, 12:40 PM

My boat only has one on that side. I did a custom ballast system on mine, maybe its for the front ballast switch which is normally there.