Watson on Watson setup question

(k9fxr) · (k9fxr) **Join Date: Jul 2005** 07-29-2008, 5:56 PM

I replaced 07 CT Watsons with 08s on my 142 Watson. Even though there is a method to offset the new plates, I can not set the boots out to the widest bolt pattern, the distance between the bolts is less on the new plates.
It seemed to ride fine (great really), but I have some knee pain I usually dont have

benj_t 07-29-2008, 6:00 PM

is your watson 142 a 08? if not then just put it on the next to last hole out and it should be fine, if not wider because of the plate

(aoblak) · (aoblak) **Join Date: Jan 2002** 07-29-2008, 6:49 PM

Hey Dave,
did you try to turn the base plate over to the the other mounting position? I had to do the same thing with my bindings but as you know I'm riding a 138.

(k9fxr) · (k9fxr) **Join Date: Jul 2005** 07-30-2008, 6:40 AM

Its an 07, I just looked and the 08 have only 3 holes on the tip and tail and 4 on the inside,
that explains it
thanks,
and Allen, I did flip them over, thanks for the thought