Inland Surfer's new 244 Enzo with a 450hp PCM

(inland_surfer) · (inland_surfer) **Join Date: Aug 2002** 04-29-2012, 7:47 AM

(wofrankwo) · (wofrankwo) **Join Date: Jul 2009** 04-29-2012, 9:12 AM

Sweeet!!!!

(wakemitch) · (wakemitch) **Join Date: Jun 2005** 04-29-2012, 10:29 AM

Nice!
but someone put their fins on backwards

(masonwakerider)

jeffs van looks sweet pulling that boat

(tmill) · (tmill) **Join Date: May 2011** 04-29-2012, 3:04 PM

you know jeff if you ever need a third i am there for you.. just saying

(inland_surfer) · (inland_surfer) **Join Date: Aug 2002** 04-30-2012, 8:43 AM

Mitch you got good eyes - I did change it

(wakemitch) · (wakemitch) **Join Date: Jun 2005** 04-30-2012, 9:36 AM

I like the orange tower a lot

(tonyv420) · (tonyv420) **Join Date: Jul 2007** 04-30-2012, 4:30 PM

Thats a nice lookin ride Jeff!

(surffresh) · (surffresh) **Join Date: Jun 2010** 05-03-2012, 5:04 AM

@ Jeff....straight up bit chin ! Curious to know if GPH is lower than what your 409's burned, Ragboy says his 409 is around 4 per hour, have not got to test my ride to see if I get close to that with a 409 in it.

(dougr) · (dougr) **Join Date: Dec 2009** 05-03-2012, 1:35 PM

are you guys using the plug n play, if so, are you using the timers and did you remove the springs from the valves. I have the plug n play and it seems that the springs slow down the fill times, but without them, the fill overfills into the center or opposite midship. I am trying to get as much info as possible, any help would be great thanks