I ride an 05' hyperlite state, with the state bindings. I love the board and I have never had a problem with it until a few weeks ago. My rear binding had a jiggle to it so i tightened it and it seemed to fix the problem. A few minuets later, i cut out toeside and i can feel my rear binding tweak. It moved a few degrees. So I decided to call it a day. I went home and put in a new "claw" and it doesnt move when i ride anymore but a few days ago, the jiggle came back again. Any suggestions?
Without seeing it's them hard to say. Make sure they are tight, and make sure when you tighten them the teeth are lined up properly. If that doesn't work try a little lock tight.
sealyon.net
(denverd1)Join Date: May 2004Location: Tyler
07-24-2007, 7:22 AM
I think what Brian is suggesting is that your screw is a bit too long. If that is the case, by adding another washer to the claw, the screw will be able to "dig deeper", thus is will be tighter, not looser.