Sanger V237 Displays "BAD" on initialization

(V237TX_Nate) · (V237TX_Nate) **Join Date: Jun 2011** 06-09-2011, 12:30 AM

Hey Guys,

I just got my V237 when I was on home on leave from Iraq, and noticed that when I turn the key to the on/acc position and the speedo and gauges initialize the LCD on the bottom of the speedo flashes "BAD" before going depth/temp or whatever it was last set on. I ran the boat for a while and had no issues, engine sounds good, temp stays around 160, transmission and v drive are normal temps (I measured them with a laser temp gun on the outside) and oil pressure is good. The only time it says bad is on initialization.

The gauges are medallion kysor - I emailed them and heard nothing back.

The dealer I bought this boat from didn't have any of the manuals for anything on the boat so I am making my way around the internet collecting them up - if you have anything for the V237 (2008) please send it my way!

Any one have any idea what the "BAD" means on the display?! Thanks!

(taft) · (taft) **Join Date: Jul 2006** 06-09-2011, 4:04 AM

Hey Nate,

If you haven't tried it yet, post up your question on the Sanger Forums as well: www.sangernation.com

I have a 237, but haven't come across that message before. Hopefully someone can sort you out.

Goodluck

(V237TX_Nate) · (V237TX_Nate) **Join Date: Jun 2011** 06-09-2011, 5:00 AM

Thanks! Will do.