HeLp... wake for Super Air Nautique 210

(wakeecuador) · (wakeecuador) **Join Date: Feb 2006** 03-10-2006, 1:25 PM

Could someone help me, how do you set up the Nautique 210 for wakesurfing?

I tryed to load only the ballast on one side and the belly, but it gets very washy... any help with speed and hot to setup weight?

TKS !

(markj) · (markj) **Join Date: Apr 2005** 03-15-2006, 11:24 PM

A good starter would be a fat sac in the right rear, and right behind the drivers side also.That is if you're goofy footed. If that isn't good enough, add one extra behind the driver's side or up front. Basically if the rub rail isn't at the water level with people leaning etc.., you're not maximizing the potential of your boat.

(kybool) · (kybool) **Join Date: Aug 2004** 03-17-2006, 3:20 PM

9 to 9.5 mph on the PP. I leave my belly sack(750#s) and both locker sacks(500#s) full and fill one extra fat sac directly behind the driver. I also usually throw the lead bags I have in the cabin up to the front(about 150#s). If you're trying to get the port side to not have white wash you're going to have a tough time, not even sure if it's possible. The starboard side is definitely the good side for the 210.

(kybool) · (kybool) **Join Date: Aug 2004** 03-17-2006, 3:29 PM

oh and I almost forgot and everyone in the boat on the starboard side as well.