Hyperlite Premier Board setup?

tracks 06-12-2005, 7:42 AM

I just purchased a Hyperlite Premier 136 Bio Board with 3DS bindings I was wondering if anyone has any suggestions on how to set up the board, binding position and fin setup. I don’t have a lot of wakeboard experience but I have been on single trick ski for years so I am pretty comfortable on the wakeboard.

(raketball) · (raketball) **Join Date: Apr 2005** 06-12-2005, 8:57 AM

Try a few different set ups and see what works best for you. I have a 141 Premier and I took the center fins out. I think it rides better, but I know people who leave the center fins in a like it better. It all depends on what feels right for you. Binding position is all a matter of preference as well. I'm 6'5" so I ride mine alomst all the way out. I have another buddy who rides my board who moves them in when he rides as he is a bit shorter than me and likes them closer.

(airwarrior04) · (airwarrior04) **Join Date: Aug 2004** 06-12-2005, 9:50 AM

Personal Preferance. (sp?)

(thane_dogg) · (thane_dogg) **Join Date: Jun 2002** 06-12-2005, 10:26 AM

a good starting point is like 15 degrees ducked out. It's just slightly, I have my bindings set-up all the way out and 18 degrees ducked out.

(raketball) · (raketball) **Join Date: Apr 2005** 06-12-2005, 1:13 PM

zack,
thanks for your clarification. i really appreciate it. your post was a great contribution to the topic.