Wake 101
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old     (nailem)      Join Date: Apr 2011       06-25-2013, 8:03 PM Reply   
my 05 enzo 230 ran straight as an arrow last year. over the winter I installed a heater. the old steering cable did not feel that bad to me but I figured while I was in the area I would replace it.

the new cable is so much better, super light. sounds good but the first time I ran the boat I had a abrupt pull to the starboard. I let go of the wheel and it turns a good half to 3/4 turn. so I did some reading on rudder tuning. although it seems weird that all of a sudden it would be this far off it is the only thing I could find.

let me start by saying you can learn to do almost anything online if you spend some time searching. I say almost because I just cant find much on rudder tuning other than if it pulls right file some of the trailing edge on the left or vise versa. also to do a little at a time.

anyone with experience please help. I have pulled the boat 4 times and it does not seem to be getting any better. I understand it is hard to say how much to take off because it would depend on the amount of pull but even a good starting point would help.

I filed off what I would say to be about 1/16 on the port trailing edge and it seemed to be maybe 30% better but still really bad so I filed off another 1/16 and it seemed the same. so I had read that if you file on the leading edge of the starboard side it would make a major adjustment so I filed 1/16 off the leading starboard and 1/16 more off the port, now it seems to be back to where I started.

I am filing starting at the trailing edge the whole length of the rudder and about 2 inches in from the trailing edge. i'm filing the trailing edge so that it has a nice smooth rounded trailing edge like the factory.

i'm about ready to take a grinder to it and grind 1/2 inch off.

please do not respond with "take it to a experienced tuner" I live off of lake Erie and I have only seen 3 other inboards on the lake and I really do not believe any of the mechanics in this area would know what they are doing.

also don't say "go buy a tunable rudder" I know this is an option but really do not want to go that rout unless I have to.


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

All times are GMT -7. The time now is 3:22 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home


© 2016 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us