So here it is
bought and Audiovox XM Radio to add to my system.
I ran all the wires and have run the power wire from my ACC 2 Switch. I know i am getting power. I have tested it with a test light. When I plug the power into the base unit it will not come on. So what i did was took the unit back and exchanged it. WHen I got to the store the guy in the stereo section took the unit over to the display and pluged it in and just like I thought the unit was bad. So he pulled another one off the shelf and before I took it home he plugged it into the display unit and it worked fine. So I get home plug it into my setup and it will not work. Any ideas on what is happening.
By the way I exchanged both cradle and unit
Thanks
Preston
Her is a pic of the unit I bought